Denali has come out with a smart and easy way to take full control of the lights on your motorcycle through their recently released DialDim lighting controller. Best of all, it comes in both plug-n-play and universal install options.

The DialDim manages two independent light circuits from a single multi-color halo switch that controls on/off, dimming, and a host of other lighting features. Connect your high beam, horn, and turn signals to unlock smart features historically reserved for CANbus enabled vehicles. 

The DialDim Controller is truly universal and can be installed on any vehicle with a battery and lights. Moreover, plug-n-play harnesses are available for popular motorcycles like the Harley-Davidson Pan America 1250, Honda Africa Twin 1100, Yamaha Tenere 700, and Kawasaki KLR 650 Gen 3. 

Whether you install the DialDim on a new adventure bike or on your overlanding truck, you will enjoy full customization of two light sets from your fingertips with these unique features:

• On/Off & Dim: Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two.
• High/Low Synch: Auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch.
• Stealth Mode: A clever 0% dim setting on the switch allows your lights to be “off” during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
• Cancel With Turn Signal: When enabled, the main lights will cancel in sync with your signal to prevent “washing out” your factory turn signal. 
• Flash as Turn Signal: When enabled your amber visibility lights will flash in sync with your factory turn signals. 
• Strobe With Horn: When enabled your auxiliary lights on both circuits will strobe at 4Hz when you use the horn.
• Electronically Fused Circuits: Both light circuits are electronically fused and can be set right from the switch itself.
• Voltage Display Indicator: The switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
• Low Voltage Cutoff: If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. 

Pricing for the Denali DialDim lightning controller starts at $199. For more information go to denalielectronics.com.